Setup Digitizer wizard |
|
Port Settings |
< Back | Next > |
Specify the port settings: Baud Rate, Parity, Data Bits, and Stop Bits.
You must make sure that the settings used for Baud Rate, Parity, Data Bits, and Stop Bits during the configuration of the digitizer tablet will also be used (exactly the same figures) for the port settings.
Page options:
|
Baud Rate: |
Specify a value for the Baud Rate; |
|
Data Bits: |
Select a value for the Data Bits (7 or 8); |
|
Parity: |
Select a value for the Parity (Even, Odd or None); |
|
Stop Bits: |
Select a value for the Stop Bits (1 or 2); |
When setting up a digitizer for the first time, you may need to change the default port configuration. For all settings on this page, you MUST fill out the exact same values as you used when configuring the digitizer tablet.
When clicking the Next button, the Setup Digitizer - Automatic Detection page will appear.
See also: